Liyu SC & TC Cutters Installation (Windows)

Read Only

Liyu SC & TC Cutters Installation (Windows)

Postby SiteAdmin » 08 Sep 2010, 22:16

UPDATE: For the SC cutters bought on/after 21 Sept 2011, you have to download the new FTDI drivers for the new FTDI chipset installed in the cutters.

For both Windows and MAC machines, log onto: http://www.ftdichip.com/Drivers/VCP.htm .
Choose the correct set of drivers based on the operating system.

Click the next button to follow instructions:


CD Driver Installation Path

SC Series (Grey)
D:\SC(English)\LiyuDrv\CH341SER
(For 64bit/Windows7 User use the latest SC_CH341SER below most updated for all system)

TC Series (Black)
D:\TC(English)\USB Drv

Corel Draw Printer driver is provided as experimental purpose only and does not work for 64 bits.
(Require the above port to setup first in order to work)
Soft1 is Graphtec Driver with no blade off-set function so only usable with drawing.
Soft2 is Made by Liyu company with blade Off-Set Function

SignCut Tutorials

If you have lost the CD this is the back up Drivers.

SC_CH341SER.zip
Latest Driver now support all windows systems.
(80.01 KiB) Downloaded 8025 times
(Latest Driver for all windows systems.)
TC(English).zip
Same As CD
(4.08 MiB) Downloaded 5025 times



Once you have configured the USB communication port, you need to configure the cutting software as well. Make sure the Com port in the device manager that you have configured on your computer match the com port in the software, otherwise the cutter wont work. For example: if you have configured COM 1 in device manager, it should be COM1 in signcutpro software. IF COM2 in device manager, should be COM2 in signcutpro software

Signcutpro:

For SC631 non optical eye, click on cutter icon in Signcutpro and this menu pops up. Set the settings according to the image shown below.
Image
For SC631E With optical Eye, click on cutter icon in Signcutpro and this menu pops up. Set the settings according to the image shown below.
Image
For TC631/TC631E with/without optical eye, click on cutter icon in Signcutpro and this menu pops up. Set the settings according to the image shown below.
Image
For PCUT, click on cutter icon in Signcutpro and this menu pops up. Set the settings 9600 or 19200 or 38400 according to the image shown below.
Image

Flexi8 Starter: Coming soon
To set up the stand, follow the video:


SiteAdmin
Site Admin
 
Posts: 4
Joined: 07 Sep 2010, 08:32

Return to Vinyl Cutter / Plotter Installation Support (Guides)

Who is online

Users browsing this forum: No registered users and 1 guest

cron